This low-temperature brazing filler metal uses 98/2 Zn-Al as its base. It is for use exclusively in hand brazing applications where rapid heat up of the base metals is possible. It utilizes a Cesium-based polymer flux system and is available on a limited basis in spooled wire and rod.
Z-2 is a low temperature brazing alloy designed exclusively for repair. Since the flux activates above the flow point of the brazing alloy, proper training is required to maximize the effectiveness of the brazing alloy.
|Preforms||Custom Shapes Rings Slugs|
|Spooled Wire||Twenty lbs per twelve inch spool|
|Standard Rod Length||20 in|
|Considerations||INDIRECT (CONDUCTION) HEAT - Success with ChannelFlux ZA-2 wire and preforms is best achieved via indirect heat (conduction). Excessive direct heat should be avoided.|
Download SDS Sheet
Bellman-Melcor distinguishes itself as a provider of premium quality brazing alloys at industry competitive prices. Our extensive inventory of brazing and soldering alloys ensures that in most cases your order can be available for immediate delivery.
- Brazing Temperature Range High: 765 F / 407 C
- Brazing Temperature Range Low: 725 F / 385 C
- Liquidus: 725 F / 385 C
- Solidus: 715 F / 379 C
- Zn: 98%
- Al: 2%
The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by the Prince and Izant Company, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances. The company and product names referenced herein are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.