ChannelFlux Silver® A-38T
A general purpose brazing alloy providing good flow and ductility. Forms good fillets and is an economical alternative to other cadmium-free alloys. ChannelFlux® Silver A-38T is used for brazing ferrous metals, copper, copper alloys, nickel, nickel alloys and combinations of these metals. The tin content provides good wetting on many difficult to wet metals such as stainless steel and tungsten carbide. The greatest use of this alloy is during furnace brazing, although it is also suitable for other brazing procedures.
|Units Per Package||1|
|Silver (Ag)||38.0 ± 1.0%|
|Copper (Cu)||32.0 ± 1.0%|
|Zinc (Zn)||28.0 ± 2.0 %|
|Total Other Elements||0.15% Max.|
|Melting Pt.||649 ºC
|Flow Pt.||721 ºC
|Approx. Wire Length (BCuP/lb.) (BAg/Tr.oz)||275 in; 0.031 diameter
30 in; 0.093 diameter
65 in; 0.062 diameter
|Brazing Range||721 to 843 ºC
1330 to 1550 ºF
|Electrical Conductivity||18 % IACS|
|Electrical Resistivity||9.50 Micro ohm-cm|
Typical applications are the brazing of ferrous, nonferrous and dissimilar metals and alloys with close joint clearances. Similar melt temperatures to cadmium alloys BrazeIt 30 and BrazeIt 35. Suitable for ferrous and non ferrous.
Standard forms of ChannelFlux Silver A38T are brazing wire, brazing rod, and brazing preforms.
It is essential that adequate ventilation be provided so that personnel will not inhale gases and fumes while brazing. The operation and maintenance of brazing equipment or facility should conform to the provisions of American National Standard (ANSI) Z49.1, "Safety in Welding and Cutting". For more complete information refer to the Material Safety Data Sheet for Brazeit A-38T.
Bellman-Melcor distinguishes itself as a provider of premium quality brazing alloys at industry competitive prices. Our extensive inventory of brazing and soldering alloys ensures that in most cases your order can be available for immediate delivery.
- Brazing Temperature Range High: 1550 F / 843 C
- Brazing Temperature Range Low: 1330 F / 721 C
- Liquidus: 1330 F / 721 C
- Solidus: 1200 F / 649 C
- Ag: 38%
- Cu: 32%
- Zn: 28%
- Sn: 2%
The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by the Prince and Izant Company, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances. The company and product names referenced herein are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.