This alloy is not permitted for use on potable water systems due to presence of lead. With excellent liquidity, it is useful on steel, copper and nickel alloys, but not recommended for applications with high levels of vibration or where the joint is subject to heavy stresses. 60/40 Tin-Lead solder is available in solid or rosin/acid cores.
|Melting Pt.||360 ºF
|Flow Pt.||375 ºF
|Preform Options||Bands (Sleeves)
Discs - Coated, Cored
Rings - Coated, Cored
Washers - Coated, Cored, Linked
|Resale Options||Bar (Various Sizes) Paste
Strip - Flux Core
Wire - Flux Core
|Approx. Wire Length (BCuP/lb.) (BAg/Tr.oz)||1056 in @ 0.062 diameter
4080 in @ 0.031 diameter
504 in @ 0.093 diameter
Useful on steel, copper am nickel alloys, this alloy offers excellent liquidity. Good for tight fit-ups.
Download SDS Sheet
- AWS: Sn 60
- PI: Sn60Pb40
- Brazing Temperature Range High: 476 F / 247 C
- Brazing Temperature Range Low: 426 F / 219 C
- Liquidus: 376 F / 191 C
- Solidus: 361 F / 183 C
- Sn: 60%
- Pb: 40%
The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by the Prince and Izant Company, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances. The company and product names referenced herein are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.